loading page

Investigation of creep damage mechanical behaviors of red sandstone considering temperature effect
  • Xiaokang Pan,
  • Filippo Berto,
  • Xiaoping Zhou
Xiaokang Pan
Wuhan University

Corresponding Author:[email protected]

Author Profile
Filippo Berto
Department of Mechanical Engineering Norwegian University of Science and Technology Trondheim 7491 Norway
Author Profile
Xiaoping Zhou
Wuhan University
Author Profile

Abstract

This work investigates the influence of temperature on the creep damage behaviors of red sandstone. The samples treated at 25 ℃, 200 ℃, 400 ℃ and 600 ℃ are selected to carry out the uniaxial compression and creep experiments. It is found that temperature has obvious influence on uniaxial compressive strength, Young’s modulus and failure modes of red sandstone. It can be also believed that the temperature can degrade the mechanical behaviors of red sandstone. However, as the temperature increases, the damage value does not always increase, the damage variable has a negative value at 25 ~ 400 ℃. It can be found that the higher the temperature, the larger the effect of loading ratio on the ratio of creep strain to instantaneous strain, that is, temperature reduces the ability of red sandstone to resist creep deformation. Acoustic emission (AE) technology has been also used in the loading process of uniaxial compression and creep tests. It is found that the probability density of AE absolute energy of different samples still satisfies the Gutenberg-Richter law well. In uniaxial compression test, as the temperature increases, the absolute value of the critical index increases exponentially. In the uniaxial creep test, as the loading ratio increases, the absolute value of the critical index first decreases and then increases. When the loading ratio is the same, as the temperature increases, the absolute value of the critical index also increases exponentially.
29 Jun 2021Submitted to Fatigue & Fracture of Engineering Materials & Structures
29 Jun 2021Submission Checks Completed
29 Jun 2021Assigned to Editor
02 Jul 2021Reviewer(s) Assigned
20 Jul 2021Review(s) Completed, Editorial Evaluation Pending
20 Jul 2021Editorial Decision: Revise Major
28 Aug 20211st Revision Received
28 Aug 2021Assigned to Editor
28 Aug 2021Submission Checks Completed
30 Aug 2021Reviewer(s) Assigned
13 Sep 2021Review(s) Completed, Editorial Evaluation Pending
30 Sep 2021Editorial Decision: Revise Major
07 Oct 20212nd Revision Received
07 Oct 2021Assigned to Editor
07 Oct 2021Submission Checks Completed
11 Oct 2021Review(s) Completed, Editorial Evaluation Pending
12 Oct 2021Editorial Decision: Accept
Feb 2022Published in Fatigue & Fracture of Engineering Materials & Structures volume 45 issue 2 on pages 411-424. 10.1111/ffe.13604